Scratch Resistant WPC Cladding Eliminates Post Painting Costs
Product Summary
Featuring an ultra-durable shield layer, this WPC cladding is highly resistant to scratches and everyday scuffs. It completely eliminates the need for sanding, staining, or repainting over its decades of service life, offering commercial property owners a truly worry-free facade that cuts long-term maintenance budgets to zero.
Product Features
-
Anti-Scratch Shield Coating
-
The high-density polymer outer shell protects against pet claws, ladders, and accidental high-traffic scuffs without exposing the inner core.
-
No Painting or Staining Required
-
The color is deeply embedded into the co-extruded shield during manufacturing, meaning it will never peel, flake, or require periodic clear coats.
-
Easy Wash Cleaning System
-
The non-porous surface prevents oil, dirt, and pollution from bonding; a simple pressure washer or soapy water removes graffiti and grime effortlessly.
Technical Specifications
| NO. |
Test Items |
Requirements |
Results |
Verdict |
| 1 |
Minimum concentrated load, N |
≥3400 |
3492 |
✔pass |
| 2 |
Static bending strength,MPa |
≥26.0 |
26.5 |
✔pass |
| 3 |
Elastic modulus, MPa |
≥3000 |
4600 |
✔pass |
| 4 |
Water absorption, % |
≤1.0 |
0.9 |
✔pass |
| 5 |
Falling hammer impact atlow temperature |
No crackat thetemperature of -10°C |
pass |
✔pass |
| 6 |
Dimensionalchange rate after waterabsorption, % |
Length ≤0.3 |
0.1 |
✔pass |
| 7 |
Dimensionalchange rate after waterabsorption, % |
Width ≤0.4 |
0.1 |
✔pass |
| 8 |
Dimensionalchange rate after waterabsorption, % |
Thickness ≤0.5 |
0.5 |
✔pass |
| 9 |
Anti-slippery value |
≥35 |
36 |
✔pass |
Certification
How to Install
Installing the Joists (Battons):
If the cladding panels are installed horizontally, the joists must be installed vertically (and vice versa). Fix the joists to the wall using expansion screws. Keep the center-to-center distance between the joists at 30cm - 35cm (if the spacing is too wide, the wall will sag or flex).
Fixing the First Panel:
Start from the bottom or the side. Use a starter clip (or screws) to secure the edge of the first panel to the joists. Make sure to double-check that this first piece is perfectly level or vertical.
Interlocking & Securing:
Insert the tongue (male profile) of the next panel into the groove (female profile) of the previous one. Snap the dedicated fixing clip onto the exposed joint where the panel meets the joist, and tighten the screw. Repeat this process, stacking them like building blocks.
Finishing & Trimming:
Cut the final panel to fit the remaining space. Cover and seal all perimeter edges and corners using matching L-shape corner trims (secured with structural adhesive or a brad nailer).
Application Gallery
Our Factory
Colors
FAQ
Q1: If the surface gets deeply scratched by heavy construction tools, how can it be repaired?
A1: For minor scuffs, a light rub with a heat gun or nylon pad can smooth the shield. For deep gouges that breach the outer layer, the individual interlocking board can be unclipped and replaced without tearing down the entire wall.
Q2: Will the color fade under intense sunlight if it is never repainted?
A2: Our co-extruded shield contains premium UV inhibitors. While it undergoes a minor, controlled color stabilization within the first 6 months of exposure, it will remain visually consistent for the next 15+ years without noticeable fading.
Product Tags:
|
|
Scratch Resistant WPC Exterior Wall Cladding Recycled Plastic Wood Cladding Images
|
